Another Know No Fear staple! And the…fourth Daemon Engine I think that I’ve put together in Nurgle’s service. When I started this army, my intent was not to pour all of my points into Fast Attack, but here we are, and if nothing else these are really fantastic-looking models with some great dakka on the tabletop. I like the Horus Heresy look on my troops but decided to go with a more solid green color scheme for the vehicles, just to break things up and allow for a little bit of color contrast in my army.
I think some of what stands out best on this model is the rusty effects that come from using Nihilakh Oxide over a coppery surface. Nihilakh Oxide at this point has to be one of my favorite technical paints, and it really shines both over the nitty-gritty detail of the guns and the flat surfaces on the drone’s fuselage. Does that count as a fuselage? Maybe, technically? In any case, I found this pretty straightforward to do up, though I had the repeat issue of the guns breaking off of the sides, or not staying intact.
I really like the design of this kit from a visual perspective, and now that I’ve finished one I might have to look into picking up another one or two down the road. From a game standpoint they’re pretty swell, and especially after being all painted up I feel like it’s a model with a lot of personality. As always, Nurgle’s Daemon Engines are great to look at, and are small enough that they don’t feel like a chore to paint up along with another batch.
Sister Pestilencia has some serious competition, for the coveted honor of being my favorite third-party model. For a Malignant Plaguecaster proxy, Hierophant Abraxxazz sports a tremendous amount of bulk and presence, in some contrast to the small-but-mighty Sister Pestilencia. While I went with the Plaguecaster build, I have to say that Artel W includes a ton of alternate bits with this kit, and makes it worth it if for nothing but the spares. Those bits are going to be really handy down the road putting together other monstrosities. But we’re not here to talk about other monstrosities, let’s talk about Hierophant Abraxxazz.
The overall bulk of the model is on par with Lords of Contagion or similar “Terminator” armor models, and you can see that in addition to his trusty staff he’s carrying a pistol in one hand, and what looks to be a tiny flamer or plague spewer of some sort over the shoulder, with a drill and lots of other sharp pointy bits scattered all over the model. The mix of armour, bone, misc. mechanical and cloth that makes up this model is fantastic, and this thing is absolutely covered in detail. This, paired with all the alternate configurations mean that whether you run Death Guard or classic Chaos, you’re gonna have a good time building this one.
Unfortunately, Abraxxazz is yet another model scarred by the Great Varnish Disaster of Christmas 2021, but even with some of the issues that caused in some of the more detailed bits I’m overall very happy with how this turned out. Since I’m not a big fan of the regular Malignant Plaguecaster sculpt, this is something I can put down in my Crusade games to make my psyker support look and feel a whole lot more imposing, and I couldn’t be more excited.
And with this, ladies and gentlemen, I’ve painted all the Death Guard characters out of the 2017 starter sets! Not that I’m keeping track or anything. Out of the three, admittedly, the Malignant Plaguecaster was my least favorite sculpt but I think out of the three they’re probably the one that turned out the best, and that I got to have the most fun with. Models with lots of flame, smoke, or cloth bits are fun like that, and a nice break from doing the armor colors over and over.
As much as I like how this model turned out, the Great Varnish Disaster of Christmas 2020 still muted out a little more detail than I’m happy with, especially in areas like the staff. That being said, I still think this is an improvement from earlier work in Nurgle’s service, and makes me look forward to how much better my next batch of anything Death Guard-related is going to turn out. And in terms of Crusade games, this is finally going to provide my Death Guard some much-needed psychic support and shenanigans.
If I had doubts or misgivings about the way that my Lord of Contagion turned out, oh boy, is this model ever the opposite – but that might be just because of what a fantastic sculpt Artel W put together for this third-party model. KinpatsuSamurai picked me up one for Christmas and I was thrilled; from the moment I saw the concept art on the company’s Facebook I knew this was going to be one that I’d have to add to my Death Guard. (And it’s totally not like I’m also putting together a Sisters of Battle army with an emphasis on third-party miniatures. Definitely not that, too.)
Sister Pestilencia did not disappoint in the least. The main sculpt is great and the model comes with some fantastic alternate head sculpts and an alternate weapon (which I worked into the Plague Marines I’ll be posting here down the road). The detail is great, the sculpt is clean, and the only drawback if there’s one to be found at all is that the model’s a little bit short for a Lord of Contagion, and the Nurgling is a little out of scale with other Nurgling models, but that’s not a dealbreaker for me. Both Sister Pestilencia and her Nurgling can be small but mighty.
Out of the color changes I made from my first Death Guard batch, changing from brownish cloth colors to a bright, bold red was absolutely the right choice, and it fits this model in particular brilliantly. While I’m still iffy on my other Lord of Contagion, this model will absolutely be on the tabletop as a new HQ proxy and fluff character, either in my running Crusade games with friends at my FLGS or in floorhammer games with my roommate – varnishing issues notwithstanding.
Starting my Death Guard galleries in 2021 off with a classic! Does the Lord of Contagion count as a classic? I mean, it’s been four years since 8th Edition, and the Know No Fear box set, so…maybe? Regardless, this is the first part of my Know No Fear batch of Plague Marines and I went into this with a goal in mind: to try and unseat Lord Felthius. For whatever strange reason, Lord Felthius and the Tainted Cohort have become the most clicked gallery on my website. As cool as that is, I wanted to see if I could finally throw together a Lord of Contagion that would unseat him from that spot on the website, or maybe in my Crusade Army.
The model itself came together brilliantly, and everything went great on the process work up until the eleventh hour when I sloshed way too much varnish on. As always, a big shout-out to Spekd for the “sponge” method that’s become the bread and butter of my Death Guard army. I will say in terms of the comparisons between models that I like the overall color balance, palette, and scheme better from this batch of Plague Marines than the last, but have I succeeded in a model that will unseat Lord Felthius? The varnish issue puts a damper on that from a Crusade and visual perspective, I think, and as for the website we’ll just have to wait and see.
This week my galleries will be all Lord of Contagion stuff, and probably with my Malignant Plague Caster stuff the week after, then my Plague Marines the week after, and I have some other fun stuff planned down the pipeline. Might be slow for a while after these galleries all the same, where my funding as a grad student has run out and I am working on finding new work. But hopefully, somewhere in there, I’ll still be able to make time for painting and posting! (Especially since I want to get in on that new year’s contest Ann’s Immaterium suggested to kick off 2021.)
What could be more 2020 than finding Plague Marines of all things under the Christmas tree? When I started this batch I was going for an old Horus Heresy look but the longer I kept at it the more I felt like they were taking on a festive life of their own. I’m happy with how this batch turned out, though (in typical fashion) I tripped over the finish line and applied the varnish way too thick on the last couple steps and had to go back and fix a few resulting defects.
I wanted to post this to give a taste of what’s coming in 2021 for individual galleries – Death Guard, Death Guard, and lots of Death Guard, with battle reports and comparisons as well between what I’ve painted before and what I accomplished with this batch. All things considered I’m very happy with how they turned out and I’m very much looking forward to seeing how they do on the tabletop – and I’m very happy with my new Artel W proxy units, including a Sister Pestilencia model from kinpatsusamurai!
2020 has been…it’s been a year, alright. And while I think I weathered it okay, it leaves me in a pretty iffy space heading into the next year. My funding runs out at the end of this month, my Master’s is still incomplete, and I don’t have a stable job at the moment, but…all the same thankful for the friends, family, and all the other good things in my life. Here’s hoping that 2021 is a more gracious year than the one now past!
I’m a casual hobbyist at best (and definitely no better as a photographer), but when I saw that Games Workshop was running Armies on Parade online this year, I decided I was gonna throw my name into the hat, and share pictures of the two armies that I’ve managed to finish this year. It’s been a long strange trip but I’m happy with how both of them have turned out so far – and I have plans to add a few new reinforcements to my Eldar, and a big expansion on my Death Guard army, too, in 2021. The Long War never ends.
Out of the two I definitely think my Death Guard army is more photogenic, ironically. I’m happier with how it turned out and how coherent it all looks together, even though I do love my multicolored Aspect Warriors for Eldar. On the Death Guard side, I think I’m most proud of my vehicles – the Blight-Haulers and the Rhino really stand out, and I’m still a sucker for my Lord of Contagion, too. Papa Nurgle’s blessings on Lord Felthius and his creepy-ass smile.
On the Eldar side, I think my space elves suffer from a slight lack of coherency in their colors. I’m very happy with my Fire-Falcon-Rainbow-Prism, my Storm Guardians, my Howling Banshees, and my HQs, but I think in the new year the Dire Avengers, Wave Serpent, and my back left Wraithlord are going to be in need of a little love and a facelift. In a way, though, this is a good problem to have – it makes me feel like I’ve improved and that it shows in my recent painting.
After writing last week’s battle report, I realized I’d missed a few essential characters in my Death Guard army when I did up my galleries – sort of! They showed up in the background of some of the other pictures but I wanted to give them a dedicated spot of their own to shine. They’re two of my favorite miniature designs in the Death Guard line – though all of the recent Death Guard Elite characters are pretty great in that regard.
And now with my whole batch posted, I find myself thinking about what I’m going to do with the next batch, once my Masters’ is done and once I have more free time on my hands. As it stands I have the Death Guard half of a Know No Fear starter still needing painting (along with a few fun other models), and as good as my first “batch” has turned out I want my next Plague Marines to stand out even more.
As much as I like the color scheme that I went with generally and the rust effects, I think my next batch is going to emphasize a more Horus Heresy color scheme, where armor is visible, and I also think I’m going to try and switch up the brown color I used for cloth. It blends too much with the other colors, and when I’ve seen people go for violet or red-colored cloaks it looks like it pops much better. Maybe something like a wine-red? We’ll see.
With Games Workshop recently removing most of the line of Easy to Build kits introduced in 8th edition, I’m glad that I got a hold of these models when I did! I hadn’t done much in terminator-sized models up to this point and initially I found the sheer number of details on these a little daunting, but each of the models in this set ended up looking really distinct with their own individual presence and personality.
With recent Power Level updates I’m not altogether sure the Tainted Cohort can be fielded on its own anymore, which means it might be worth picking up the regular Blightlord Terminators at some point, but even once I do I think I’m going to find excuses to use these models as part of that squad because they just look so imposing. And, as always, I love Nurglings.
These are probably one of my favorite Death Guard models, and these demonic little roombas have carried the team so far in test games I’ve done with my Death Guard army for 9th. I got one of these from a friend as a gift a while back and picked up two more to complete the set. Really looking forward to busting these out for the Crusade games that me and local friends are going to be doing soon.
I did these up in the same style as all of my other Death Guard, with magnets for transport and for securing them to the bases. I’m really happy with how the rust effects turned out on the copper, and how the colors blend together!